WHAT TO DO IF YOUR WATER HEATER SUDDENLY STOPS WORKING

What To Do If Your Water Heater Suddenly Stops Working

What To Do If Your Water Heater Suddenly Stops Working

Blog Article

Call Today

Do you find yourself interested in help on Hot Water Heater Repair?


Hot Water Heater Repair
Lots of modern-day houses take advantage of an electric hot water heater for their heating unit, as a result of its convenience as well as convenience of use. However, similar to any other electrical home appliances, issues might occur with its use, all of a sudden. It can be truly frustrating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm adequate or perhaps as well warm. Whatever the case might be, water heater problems can be rather aggravating. Thankfully, we have actually made a list of feasible remedies to your water heater problems. There are a variety of factors that might create a number of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of need to not pose way too much of an issue if you comply with these actions:

Check Your Power Supply:


As basic as this may appear, it is really necessary. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water suddenly retires is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the issue, simply turn it off and on once again. Change any kind of broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently functioning.

Examine the Burner in the Water Heater:


If it's not a power problem, then try taking a look at your burner if it is still working. Check each of your burner to make sure the trouble isn't with any one of them. If any one of them is damaged, change that component and then check whether the warm water is back on.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and press the red button for temperature reset above the thermostat. This should help warm the water. Transform the breaker back on and also examine if the trouble has actually been solved.

Call An Expert:


If after replacing all defective components and also resetting your temperature level, the water heater still isn't working, you may require to speak to a professional plumber for an expert opinion. The trouble with your heating unit could be that the cold and hot taps have actually been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the instance may be, a professional plumber would certainly aid fix the issue.

Conclusion


Water heater troubles are not constantly major. Many of them result from small issues like a blown fuse or worn-out burner. Replacing the faulty components must work. However, if you are still incapable to fix the problem, give a call to your nearest plumber ahead to get it taken care of.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



We hope you liked our excerpt on No Hot Water — Water Heater Repair. Thanks a lot for finding the time to browse our blog post. Sharing is caring. Helping others is fun. Thank you for your time. Please stop by our site back soon.




View More

Report this page